BMS · Birmingham · Maintenance, upgrades, installation

BMS Engineers in Birmingham: Maintenance, Upgrades and Installation

Building management system maintenance, fault finding, upgrades and new installations for offices, residential towers and mixed-use schemes across Birmingham.

  • Maintenance, upgrades and installs
  • Digital report with photos
  • All major BMS platforms
Mainteniq BMS engineer checking air handling units in an office plant room

Who maintains building management systems in Birmingham?

Mainteniq maintains, upgrades and installs building management systems in Birmingham for facilities managers, managing agents and owners of commercial and residential buildings. We work on Trend, Delta Controls, Tridium Niagara, Titan Products, Distech Controls, Johnson Controls, Siemens, Honeywell and Schneider Electric, and every visit ends with a digital report with photos.

BMS in Birmingham's Buildings

Birmingham's city centre combines the offices of the Colmore Business District, the Brindleyplace and Paradise developments and a fast-growing stock of residential towers in Digbeth, Eastside and the Jewellery Quarter. Each brings its own mix of air handling, fan coil units, communal heating and controls.

Many of the city's established office buildings still run on controls installed one or two refurbishments ago. Keeping those systems serviced, documented and backed up, then upgrading them in stages, avoids the cost of starting again when a controller fails.

City-centre offices

Air handling units, fan coil units and chillers under BMS control in the Colmore Business District and beyond.

Residential towers

Communal heating, HIUs and ventilation in new residential and Build-to-Rent towers.

Mixed-use developments

Offices, homes, retail and leisure sharing plant and controls in large regeneration schemes.

Older commercial buildings

Long-serving Trend, Satchwell and other legacy controls kept running, then upgraded.

What We Usually Find in Birmingham Plant Rooms

Problems we often see in Birmingham buildings like these, and what they usually come down to.

1Controls from two refurbishments agoOffice floors fitted out again and again while the outstations and graphics stayed as they were, so the screens no longer match the building.
2Mixed manufacturers on one siteA Trend panel in the plant room, a different make on the newer floors and nobody able to see both from one screen.
3Cooling and heating fightingFan coil units heating and cooling the same space because setpoints and dead bands drifted apart over the years.
4Satchwell still in serviceLong-obsolete controls quietly running core plant, with no spares on the shelf if one fails.

Birmingham's heat network

Birmingham District Energy Company

Birmingham District Energy Company, a partnership with Birmingham City Council, runs combined heat and power networks that serve buildings including the International Convention Centre, Birmingham Town Hall, the Council House and the Library of Birmingham. Its Eastside schemes serve Aston University and Birmingham Children's Hospital, and the networks are linked through New Street station.

Buildings on and around these networks depend on their own BMS to manage the heat and cooling they receive. We maintain and upgrade those building-side controls: the plant, the metering and the room control behind each connection.

Since 27 January 2026 Ofgem has regulated heat networks. See how we look after the building side on our heat network maintenance page.

BMS Services in Birmingham

The same engineers, the same service form and the same digital report as our London work.

BMS maintenance

Planned servicing, fault finding and repair, with a digital report with photos after every visit.

More

BMS upgrades

Old and obsolete systems upgraded in stages, keeping the sensors, valves and wiring that still work.

More

New installations

Controls design, panels, programming, commissioning and a full handover pack.

More

Trend specialists

IQ2, IQ3 and IQ4 controllers and 963 front ends, including IQ2 and IQ3 to IQ4 upgrades.

More

Delta Controls specialists

enteliWEB, RED5 BACnet controllers and older Delta systems.

More

Tridium Niagara specialists

Niagara AX and Niagara 4 stations and JACE controllers, including AX to N4 migration.

More

Titan Products specialists

TP-710 fan coil controllers, Touch-7 screens and NetMaster networks in residential blocks.

More

How we cover it

Honest Coverage: How We Look After BMS in Birmingham

“Will a London firm really turn up in Birmingham?” It is a fair question, so here is the straight answer.

Mainteniq is based in Westminster. We do not have a depot in Birmingham, and we will not pretend to. Our engineers travel to Birmingham for planned visits, upgrades and installations, and we agree attendance times for planned and urgent visits in writing before you sign anything. Where the building's IT team and the system allow it, we connect remotely first, so many faults are diagnosed before anyone travels and the engineer arrives with the right parts.

Remote diagnosis first

Where your IT team approves a route, alarms and trend logs are read remotely, with named accounts and no shared passwords.

Attendance agreed in writing

Planned visit dates and urgent response times set out in the contract, not promised on the phone.

24/7 emergency line

Answered day and night, including weekends, so a fault is logged straight away, even before an engineer travels.

Controls and plant

The same team services the plant the BMS runs, from fan coils and AHUs to heat pumps, so faults are not passed between contractors.

How to Start a BMS Job in Birmingham

  1. 1

    Send us your BMS details

    Photos of the controller and panel, the building address and what is going wrong, by WhatsApp or the form.

  2. 2

    We reply with a recommendation

    What we think is happening, the options, and the next steps for your building.

  3. 3

    Engineer visit and photo report

    An engineer attends, does the work and sends a digital report with photos.

Send details on WhatsApp
Digital reports, not paperwork

A photographed PDF report after every BMS visit in Birmingham

No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.

You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.

  • Before and after photosEvery unit and fault photographed on site
  • Readings and checksTemperatures, pressures and test results recorded
  • Work done and next stepsWhat was fixed, what needs quoting, when we return
  • Sent the same dayDigital PDF report by email, ready to forward

Example layout. Completed on site in Maintivo.

Areas We Cover in Birmingham

Including, but not limited to:

Colmore Business DistrictBrindleyplace and ParadiseDigbethEastsideJewellery QuarterEdgbaston

We also work in London and the Home Counties, and in Manchester, Leeds and Bristol.

Qualifications Behind the Work

SafeContractor ApprovedMAINTENIQ LTD, SSIP certificate NZ2372
BMS Control Systems trainedInnotech / Uxbridge College: DDC, programming, iComm, fault-finding
REFCOM F-Gas certifiedREF1024168, air conditioning and refrigerant work
SAV Advanced HIU Service EngineerHeat interface units in communal heating
NICEIC Domestic VentilationDV-02 certified
NICEIC certified electriciansElectrical work; gas work by Gas Safe registered engineers

Send Us Your Birmingham BMS Details

Photos of the controller and panel, the building address and what is going wrong. We reply with a recommendation and the next steps.

BMS in Birmingham: Common Questions

Yes. Mainteniq provides planned BMS maintenance, fault finding, upgrades and new installations in Birmingham, working on Trend, Delta Controls, Tridium Niagara, Titan Products, Distech Controls, Johnson Controls, Siemens, Honeywell and Schneider Electric. Every visit ends with a digital report with photos.

Yes. We maintain and upgrade the BMS that runs air handling units, fan coil units, chillers and heating plant in city-centre office buildings, including older systems installed before a refurbishment.

Yes. We support older Satchwell, Trend IQ2 and IQ3 and other legacy systems, then upgrade or replace them in stages, keeping the sensors, valves and wiring that still test sound.

A building connected to a district energy network still needs its own controls for the heat and cooling it receives, the metering and the room control. We maintain and upgrade that building-side control layer.

Send us your BMS details: photos of the controller and panel, the building address and what is going wrong. We reply with a recommendation and the next steps.

No. Mainteniq is based in Westminster, London, and our engineers travel to Birmingham. We agree attendance times for planned and urgent visits in writing before you sign, and where the building's IT team and the system allow it, we connect remotely first so many faults are diagnosed before anyone travels. Our emergency line is answered 24/7.

Yes for the passwords, backups, points list and graphics, which are handed to you. Software licences are registered in your name wherever the manufacturer's licence allows it; where a licence cannot be transferred, we tell you before you commit.

Emergency line. Same-day response across London.

Something broken right now? Speak to an engineer.

A clear price before any work starts, and a written report after. For planned servicing, compliance certificates and contracts, WhatsApp us and we will call you back.

REFCOM certified REF1024168Gas Safe registered engineersSafeContractor approvedNICEIC certified electricians

Emergency HVAC and heating repair in London