KNX · Control4 · Crestron · Lutron · London
Home Automation Systems in London: KNX, Control4, Crestron and Lutron
Whole-home automation for London houses and apartments: lighting, blinds, heating, ventilation, audio, TV and security on one system. We help you choose the right platform, install it, hand over every file and look after it.
- Free site visit in London
- Honest platform advice
- Project files handed over

Who installs KNX, Control4, Crestron and Lutron in London?
Mainteniq installs, programmes and supports whole-home automation on open systems such as KNX and Loxone across London and the Home Counties, and supports homes that already run on Control4, Crestron and Lutron. Our NICEIC certified electricians and engineers install the wiring, keypads, sensors, heating and ventilation, and we stay to look after the system, with a 24/7 emergency line, nights and weekends included.
The platform matters less than two things most installers skip: getting the heating and ventilation to work with it, and handing over the files so you are never locked out. We are a building services and maintenance company, so the underfloor heating, MVHR and air conditioning are our everyday work, and we stay to look after the system afterwards. For smaller, app-based smart home set-ups see our smart home installation page; for apartments and whole residential towers see smart homes for luxury apartments; for lighting on its own see smart lighting installation; and for a system another installer left behind see smart home maintenance and support.
Straight answer on dealers: we are not a Control4, Crestron or Lutron dealer, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files; our team also works on Rako lighting. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route, so we look after everything around them (wiring, network, power, heating and the HIU) and tell you up front what we can and cannot change.
Side by side
KNX vs Control4 vs Crestron vs Lutron
The biggest difference is not features, it is who is allowed to change your system later.
KNX
Open standard
- Who can change it later
- Any KNX installer, if you hold the project file
- Wiring
- Mainly wired
- Best for
- New builds and major refurbs that want freedom to change installer
Control4
Proprietary
- Who can change it later
- An authorised Control4 dealer
- Wiring
- Wired and wireless
- Best for
- Audio, TV and lighting on one remote
Crestron
Proprietary
- Who can change it later
- An authorised Crestron dealer
- Wiring
- Mainly wired
- Best for
- Large, fully custom homes
Lutron
Proprietary
- Who can change it later
- Caseta: you. RadioRA 3 and HomeWorks: a certified installer
- Wiring
- Wireless or wired
- Best for
- Lighting and blinds, including retrofit
Matter / app-based
Open, consumer
- Who can change it later
- You, through the app
- Wiring
- Wireless
- Best for
- Flats, rentals and smaller budgets
Sources: KNX Association, Lutron, Control4.
Which System Suits Your Home?
Start with what matters most to you. On the free site visit we narrow it down for your property and budget.
If you want: Never being tied to one installer
Consider KNX
Hundreds of manufacturers and any KNX installer can take it over with the project file.
If you want: Cinema, music and lighting on one remote
Consider Control4 or Crestron
Built around audio and video, with lighting, blinds and security on the same remote and app.
If you want: Beautiful lighting and blinds, little disruption
Consider Lutron
Wireless options suit retrofit; scene keypads replace rows of switches.
If you want: Keeping cost down in a flat or a let
Consider Matter and app-based kit
No rewiring, works with Alexa, Google and Apple, easy to change later.
Building or refurbishing? Then a wired system is worth considering whatever you choose, because cable is cheap before the plaster goes up and expensive after. Living in it already? Wireless and retrofit-friendly options avoid chasing walls.
What a Whole-Home System Can Run
One set of keypads, one app and one set of scenes for all of it. "Good night" turns off the lights, closes the blinds, sets the heating back and arms the alarm.
Heating and ventilation are where whole-home systems most often disappoint. We also service MVHR, air conditioning and heat pumps, so the system controls them properly.
New builds and refurbishments
Decide Before First Fix
The platform should be chosen before the electrician pulls the first cable. Here is the order a wired system goes in.

- 1
Design
Rooms, scenes, keypads and plant agreed with you and the architect, before the electrician starts.
- 2
First fix
Cables pulled before plasterboard goes up. This is the cheap moment; adding cable later is not.
- 3
Second fix
Keypads, touchscreens, sensors, actuators and the control panel fitted and tested.
- 4
Programming
Scenes, schedules and heating logic set up, then commissioned room by room.
- 5
Handover
Training, logins, project files and as-built drawings handed to you.
- 6
Support
Planned check-ups and changes by the same local team.
Installer gone?
We Take Over Existing Systems
A system with nobody to support it is the most common call we get. What we can do depends on what you have.
What You Should Get at Handover
Ask any installer for this list. Every system we install comes with all of it.
- Admin logins and passwords in your name
- The programming or project file (for KNX, the ETS file)
- A device list with every keypad, sensor and controller
- A network diagram and the Wi-Fi details
- As-built wiring drawings
- Security update dates for each connected device
From our jobs
Home Automation From Our Jobs
Real photos from London homes we have worked in: KNX and Loxone modules, the board behind them, and the panels and keypads people use.




How It Works
- 1
Free site visit
We see the property or the plans, the wiring, the heating and the existing system. Free in London; in the Home Counties, free for larger jobs.
- 2
Digital report with photos
Which platforms suit the home, what the wiring allows and what to decide first, sent by email.
- 3
Design and fixed quote
Room-by-room design and a fixed price, agreed before work starts.
- 4
Install, handover, support
Installed, programmed, handed over with every file, and supported afterwards.
A photographed PDF report after every home automation visit
No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.
You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.
- Before and after photosEvery unit and fault photographed on site
- Readings and checksTemperatures, pressures and test results recorded
- Work done and next stepsWhat was fixed, what needs quoting, when we return
- Sent the same dayDigital PDF report by email, ready to forward
Example layout. Completed on site in Maintivo.
What customers say on Google
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”
Deborah L.
Google review
“Excellent service. Price assessment: reasonable price.”
Attila B.
Google review
“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”
Ben
Google review
Book a Free Home Automation Site Visit
In London an engineer comes to see the property, the plans or your existing system for free, and in the Home Counties the visit is free for larger jobs. You get a digital report with photos and honest platform advice, with no obligation to go ahead.


