Service · Repair · Takeover · Support · London

Smart Home Maintenance and Support in London

Smart homes need looking after: updates, flat batteries, devices dropping off the Wi-Fi, and installers who disappeared. We service, repair and take over smart home and home automation systems, on a maintenance plan or when something breaks.

Call +44 783 456 2366
  • Free site visit in London
  • We take over systems from other installers
  • Report after every visit
Smart home distribution board in a London home with control modules, breakers and labelled wiring, the first thing Mainteniq checks on a service visit

Who maintains smart home systems in London?

Mainteniq maintains, repairs and supports smart home systems across London and the Home Counties: smart heating, lighting, locks, blinds, sensors and Wi-Fi, and whole-home KNX, Loxone and Rako systems, plus the network, power and heating around Control4, Crestron and Lutron systems. We look after systems we installed and take over systems other installers left behind, with a 24/7 emergency line, nights and weekends included.

Most smart home installers are gone once the job is handed over. We are a maintenance company: planned servicing is what we do every day for heating, air conditioning and building systems, so your smart home gets the same treatment, with a visit schedule, a report after every visit and one team to call. For a new system see smart home installation.

Why smart homes stop working

The Smart Home Faults We Fix Most

Smart homes rarely fail all at once. They drift: one device drops off, one update breaks a scene, one battery goes flat, until nobody trusts the system.

Network rack in a London flat with switch, smart home controller and UPS, the first thing we check on a smart home service visit
Most smart home faults start with the network, so that is where every service visit starts.

Devices keep dropping off

Our fix: Network checked end to end: access points, channels and a separate network for smart devices.

Flat batteries in locks and sensors

Our fix: Batteries replaced on a schedule, before the lock or the leak sensor stops working.

An update broke the scenes

Our fix: Updates applied in a controlled way, then every scene and integration tested.

The maker discontinued the product

Our fix: Google ended support for the 1st and 2nd generation Nest Learning Thermostat on 25 October 2025, and Hive ended Hive View cameras and HomeShield on 1 August 2025. We find end-of-life kit on the first visit and replace it with supported equivalents before it stops working.

The installer has gone

Our fix: We take the system over, recover access where we can and document it.

A new router broke everything

Our fix: Devices moved onto the new network and the set-up documented so it does not happen again.

Heating controls out of step with the boiler or HIU

Our fix: Schedules, limits and wiring checked by heating engineers, not just in the app.

Nobody has the logins

Our fix: Accounts moved into the owner's name and passwords recorded securely.

What a Smart Home Service Visit Covers

A planned visit works through the system in a set order and ends with a report, so you always know where things stand.

  1. 1

    Network health

    Wi-Fi coverage, access points and the smart device network.

  2. 2

    Updates

    Controller, app and device updates applied and checked.

  3. 3

    Batteries

    Locks, sensors and keypads checked and replaced where low.

  4. 4

    Scenes and keypads

    Every scene pressed and every keypad tested.

  5. 5

    Locks and door entry

    Codes, users and door entry checked and tidied.

  6. 6

    Heating and blinds

    Schedules, limits and motors checked against how you live now.

  7. 7

    Backup

    A fresh backup of the system configuration.

  8. 8

    Report

    A digital report with photos and what to change next.

Installer gone?

Taking Over a Smart Home Another Installer Left Behind

A system with nobody to support it is the most common call we get. What we can do depends on what you have.

Smart lock with keypad on the front door of a London flat
Locks, codes and users are checked and tidied on every visit.

KNX with the project file

We take it over, change it and extend it.

KNX without the project file

Often recoverable, but slower. We document what is installed first.

Control4, Crestron or Lutron

We are not a dealer, so we say so up front: reprogramming needs the dealer's access or the maker's authorised handover route. We look after the network, power, wiring and heating around it, and help you arrange the handover.

App-based kit

Moved onto an owner account in your name and tidied onto one app.

The network

Mapped, labelled and documented, because most faults start there.

A plan from then on

Visits on a schedule, a report every time, and priority when something breaks.

From our jobs

What We Look After

Real photos from our jobs. A smart home is only as reliable as the board and wiring behind the touch panel, so that is where every service visit starts.

Smart home distribution board with control modules, breakers and labelled wiring in a London home
A smart home distribution board: control modules and breakers, with every circuit labelled.
Gira KNX and Loxone lighting control modules mounted in a utility cupboard in a London flat
Lighting control modules (Gira KNX and Loxone) in a flat’s utility cupboard.
AMX Modero X touch panel mounted on the wall of a London apartment
An AMX touch panel in a London apartment.
Mainteniq London engineer in a branded shirt arriving at a client's flat with his tool bag
A Mainteniq engineer arriving at a client's flat in London.

On a maintenance plan

What a Smart Home Maintenance Plan Includes

Every plan is built around the system and how the home is used, and agreed in writing.

Planned visits

Service visits once or twice a year, booked around you.

Updates and backups

Updates applied in a controlled way and a fresh backup taken every visit.

Batteries and consumables

Batteries in locks, sensors and keypads checked and replaced.

Priority call-outs

Plan clients get priority on our 24/7 emergency line, nights and weekends included, and in London we attend the same day when heating or hot water has stopped.

End-of-life check

Every device checked against the maker's support dates, so discontinued kit such as the 1st and 2nd generation Nest Learning Thermostat (support ended 25 October 2025) or Hive View cameras and HomeShield (ended 1 August 2025) is replaced on your timetable, not when it fails.

Security under PSTI

Since 29 April 2024 the UK PSTI regime bans default passwords on connectable products and requires makers to publish their security update period. We remove default and old contractor passwords, set unique ones and record each device's update period.

Logins handed over securely

Accounts in the owner's name, and passwords handed over through a password manager or in person, never emailed in plain text.

Reports

A digital report with photos after every visit, so you have a record of the system.

Heating and ventilation

Add boiler, HIU and MVHR servicing to the same plan.

Systems We Maintain

Systems we installed and systems other installers left behind. We are not a Control4, Crestron or Lutron dealer, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route, so we look after everything around them (wiring, network, power, heating and the HIU) and tell you up front what we can and cannot change.

KNX Control4 Crestron Lutron Loxone Rako CasambiPhilips HuetadoDrayton WiserHoneywell evohomeYaleNukiRingAmazon AlexaGoogle HomeApple HomeCompare KNX, Control4 and Crestron

How Smart Home Maintenance Works With Us

  1. 1

    Free site visit

    We look at what is installed, what is not working and how the home is used. Free in London; in the Home Counties, free for larger jobs.

  2. 2

    Digital report with photos

    What we found, what it means and what to do first, sent by email.

  3. 3

    Clear recommendation

    Explained in plain English and priced as a fixed quote before any work starts.

  4. 4

    Work done and recorded

    Every visit ends with a new report, readings and a fresh backup of the system.

Digital reports, not paperwork

A photographed PDF report after every smart home service visit

No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.

You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.

  • Before and after photosEvery unit and fault photographed on site
  • Readings and checksTemperatures, pressures and test results recorded
  • Work done and next stepsWhat was fixed, what needs quoting, when we return
  • Sent the same dayDigital PDF report by email, ready to forward

Example layout. Completed on site in Maintivo.

Qualifications Behind Our Smart Home Maintenance Work

SafeContractor ApprovedMAINTENIQ LTD, SSIP certificate NZ2372
NICEIC certified electriciansWiring, keypads and lighting circuits to BS 7671
NICEIC Domestic VentilationDV-02 certified, MVHR and extract ventilation
SAV Advanced HIU Service EngineerHeating controls that work with heat interface units
REFCOM F-Gas certifiedREF1024168, air conditioning and fan coil units
Building controls trainedInnotech / Uxbridge College: controls programming and fault-finding

Where We Carry Out Smart Home Maintenance

All 32 London boroughs and the Home Counties. Site visits are free in London and, in the Home Counties, free for larger jobs. That includes the central London towers and mansion blocks of Westminster, Mayfair, Belgravia, Kensington and Chelsea, the City, Canary Wharf, Nine Elms and Battersea.

Areas we cover

What customers say on Google

5.0Google rating
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”

Deborah L.

Google review

“Excellent service. Price assessment: reasonable price.”

Attila B.

Google review

“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”

Ben

Google review

Read all reviews on Google

Smart Home Not Working Like It Should?

Tell us what is wrong and what is installed. We visit for free, send a report with photos, and give you a fixed quote for the fix or a maintenance plan.

WhatsApp us Call

Smart Home Maintenance: Common Questions

Yes. Smart homes drift over time: devices drop off the network, updates break integrations, batteries in locks and sensors run flat and makers discontinue products. A planned service visit once or twice a year keeps the system reliable and catches problems before they leave you locked out or in the dark.

Usually, yes. A KNX system with its project file can be taken over, changed and extended. Without the file it is often recoverable, but slower. Control4, Crestron and Lutron RadioRA 3 and HomeWorks need the dealer's access or the maker's authorised handover route, because we are not a dealer for those platforms; we tell you that up front and look after the network, power, wiring and heating around them. App-based kit is moved onto an owner account in your name.

We check the network and Wi-Fi, apply updates, replace low batteries, test every scene and keypad, check locks, codes and door entry, review heating and blind schedules, take a backup of the configuration, and send a digital report with photos.

Yes, this is one of the most common faults. We move the devices onto the new network, check every integration and document the set-up so the next change does not break it.

Yes. A plan includes planned service visits once or twice a year, updates and backups, battery replacements, priority call-outs on our 24/7 emergency line and a report after every visit. Each visit also checks for end-of-life devices and PSTI security, and logins are handed over securely in the owner's name. You can add boiler, HIU and MVHR servicing to the same plan.

Smart heating, lighting, locks, blinds, sensors and Wi-Fi, whole-home KNX and Loxone systems, and Rako lighting, whether we installed them or not. For Control4, Crestron and Lutron RadioRA 3 and HomeWorks, programme changes go through the dealer or the maker's authorised route, because we are not a dealer for those platforms.

Plan a replacement before it fails. Google ended support for the 1st and 2nd generation Nest Learning Thermostat on 25 October 2025, and Hive ended Hive View cameras and HomeShield on 1 August 2025. We check every device against the maker's support dates on a service visit and replace end-of-life kit with a supported equivalent that suits your boiler or HIU.

Since 29 April 2024 the UK PSTI regime bans default passwords on connectable products and requires makers to publish how long they will provide security updates. We remove default and old contractor passwords, set unique ones, record each device's update period, keep smart devices on their own network and hand logins over in the owner's name through a password manager or in person, never in a plain-text email.

Yes. We run a 24/7 emergency line, nights and weekends included, with priority for maintenance plan clients. In London we attend the same day when heating or hot water has stopped.

No, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route. We look after everything around them, such as the wiring, network, power, heating and HIU, and tell you up front what we can and cannot change.

We cover all 32 London boroughs and the Home Counties. Site visits are free in London and, in the Home Counties, free for larger jobs. Across Berkshire, Surrey, Milton Keynes and Kent we can usually attend within a day.

Emergency line. Same-day response across London.

Something broken right now? Speak to an engineer.

A clear price before any work starts, and a written report after. For planned servicing, compliance certificates and contracts, WhatsApp us and we will call you back.

REFCOM certified REF1024168Gas Safe registered engineersSafeContractor approvedNICEIC certified electricians

Emergency HVAC and heating repair in London