Titan Products · TP-710 · Touch-7 · NetMaster · London

Titan Products BMS Engineers for London Apartment Blocks

Servicing, fault finding and re-commissioning for Titan Products controls: the TP-710 fan coil and underfloor heating controllers, Touch-7 and Touch-4 touchscreens and NetMaster networks found in London residential blocks and Build-to-Rent buildings.

Call +44 783 456 2366
  • Free site visit in London
  • Report per flat with photos
  • Fan coils and controls together
Mainteniq London engineer removing the filter from a ceiling-void fan coil unit in a new-build flat

Who services Titan Products controls in London?

Mainteniq services, repairs and re-commissions Titan Products building controls across London and a 120-mile radius, and in Manchester, Birmingham, Leeds and Bristol. We work on TP-710 fan coil and underfloor heating controllers, Touch-7 and Touch-4 touchscreens, BACnet networks and NetMaster, and we service the fan coils they control on the same visit.

Titan Products is a UK manufacturer, based in Stockport since 1987, and its controls are fitted in many London new-build apartment blocks. Each flat has its own controller and touchscreen, all linked on one network, so a building can have hundreds of them. When the installer has moved on, nobody looks after that network until residents start complaining. We take it over, test it, keep it serviced and report flat by flat. Titan is one of the platforms we specialise in; see all building management systems we work on.

Know your system

How a Titan System Works in a Block of Flats

Three layers, from the touchscreen on a resident's wall to the network manager that sees the whole building. A fault in any layer shows up as a complaint in a flat.

In each flat

Touch-7 or Touch-4The touchscreen on the wall the resident uses.
TP-710 controllerRuns the fan coil or underfloor heating for that flat.
Fan coil and valvesThe plant in the ceiling void that heats and cools.

Across the building

BACnet MS/TP networkThe data cable linking every flat's controller, floor by floor.
MS/TP to IP routerConnects each run of controllers to the building's IP network.
NetMasterTitan's network manager, where the whole building is seen at once.

Remote

ICON cloudTitan's cloud platform for monitoring and setpoint changes off site.
Wider BMSBecause Titan talks BACnet, it can feed a building-wide BMS.

For managing agents

What Residents Report, and What Is Usually Behind It

The complaint comes from the flat. The cause is often somewhere else: in the ceiling, on the network or in the heat supply. This is what we check first.

Mainteniq London engineer and a managing agent arriving at a flat for a controls visit in an apartment block corridor
Flat access arranged with the managing agent, floor by floor.

"My flat is too hot" or "too cold"

Usually: A valve actuator stuck open or shut, setpoint limits set wrongly at commissioning, or no heat coming from the building's heat network.

"The screen is blank or frozen"

Usually: Lost power or lost communication between the wall touchscreen and the TP-710 controller above the ceiling.

"The fan runs but nothing changes"

Usually: Air moving but no hot or chilled water reaching the coil: a valve, an actuator or flow problem, not the fan.

"Flats are missing from NetMaster"

Usually: A fault on the BACnet MS/TP cable run, an address clash or a failed controller, which can knock out more than one flat.

"Water is dripping from the ceiling"

Usually: A blocked condensate drain or tray on the fan coil when it is cooling. Needs attention before it damages the ceiling.

"One underfloor zone is always cold"

Usually: A zone actuator or manifold fault on the multi-zone heating controller, or the zone set up wrongly at handover. See underfloor heating repair below.

What we do

Titan Products BMS Services

One team for the controls and the fan coils they run, so a "too hot" complaint is fixed in one visit instead of two contractors blaming each other.

Titan servicing in blocks

Planned visits: network health checked, flats sampled floor by floor, fan coils cleaned and controls tested.

Fan coil servicing

Flat-by-flat fault finding

Too hot, too cold, blank screens, noisy fans. Traced to the controller, the valve, the coil or the heat supply.

Network and NetMaster

Missing controllers found, MS/TP runs tested, addresses sorted, so the whole building shows up again.

Re-commissioning

Setpoints, limits, schedules and fan speeds set properly per flat, documented and backed up.

Void and handover checks

Controls checked between tenants or before handover, so the next resident starts with a working flat.

Remote monitoring

We set up ICON or wider remote monitoring and smart analytics, so faults are flagged between visits.

How We Service a Titan Block

A building with 200 flats can't be fixed one complaint at a time. We work from the network down, then floor by floor.

  1. 1

    Network first

    NetMaster and every MS/TP run checked, so we know which controllers are online before we knock on doors.

  2. 2

    Floor by floor

    A sample of flats on each floor tested: touchscreen, controller, valves, fan, filter and condensate.

  3. 3

    Fix as we go

    Common faults fixed on the day where possible, with resident access arranged through the managing agent.

  4. 4

    Report per flat

    A digital report with photos, flat by flat, so the managing agent knows exactly what was found and done.

Part of a wider block maintenance contract, or on its own. Communal heating too? See heat network maintenance.

No Heating or Cooling in a Flat? Our Line Is 24/7

Residents and managing agents can call day or night, including weekends. In London we aim to attend the same day when a flat has no heating, no hot water or no cooling, and because we service the fan coil units as well as the Titan controls, the engineer can fix either on the same visit.

Call +44 783 456 2366

How It Works

  1. 1

    Free site visit

    We look at the Titan network, NetMaster and a sample of flats. Free in London; in the Home Counties, free for larger jobs, otherwise we quote the visit first.

  2. 2

    Digital report with photos

    What is online, what is failing and which flats need attention, sent by email.

  3. 3

    Clear recommendation

    Planned servicing, repairs or re-commissioning, explained in plain English and priced as a fixed quote.

  4. 4

    Planned visits

    Servicing on an agreed schedule, with a new report and a fresh backup every visit.

Digital reports, not paperwork

A photographed PDF report after every Titan block visit

No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.

You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.

  • Before and after photosEvery unit and fault photographed on site
  • Readings and checksTemperatures, pressures and test results recorded
  • Work done and next stepsWhat was fixed, what needs quoting, when we return
  • Sent the same dayDigital PDF report by email, ready to forward

Example layout. Completed on site in Maintivo.

From our jobs

Titan Controllers From Our Jobs

Real photos from fan coil units we service: Titan Products controllers are often found in the fan coil units of London apartment blocks.

Titan Products fan coil controller wired inside a fan coil unit in a London building
A Titan Products fan coil controller, wired and checked.
Inside an EC fan coil unit with the panel off, showing the controller wiring and power connections
Inside a fan coil unit: controller wiring and power connections checked.

Qualifications Behind the Work

SafeContractor ApprovedMAINTENIQ LTD, SSIP certificate NZ2372
BMS Control Systems trainedInnotech / Uxbridge College: DDC, programming, iComm, fault-finding
REFCOM F-Gas certifiedREF1024168, air conditioning and refrigerant work
SAV Advanced HIU Service EngineerHeat interface units in communal heating
NICEIC Domestic VentilationDV-02 certified
NICEIC certified electriciansElectrical work; gas work by Gas Safe registered engineers

Where We Work on Titan Systems

All 32 London boroughs, with a free site visit, and a 120-mile radius of the Home Counties, where the visit is free for larger jobs and quoted first for smaller ones. We also take on Titan maintenance, upgrades and new installations in these cities:

Outside London? Send us your BMS details

What customers say on Google

5.0Google rating
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”

Deborah L.

Google review

“Excellent service. Price assessment: reasonable price.”

Attila B.

Google review

“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”

Ben

Google review

Read all reviews on Google

Book a Free Titan Controls Site Visit

In London an engineer comes to see your building's Titan network for free; in the Home Counties it is free for larger jobs, and for smaller ones we quote the visit first. You get a digital report with photos and a clear recommendation, with no obligation to go ahead.

WhatsApp us Call

Titan Products BMS: Common Questions

Yes. Mainteniq services, repairs and re-commissions Titan Products building controls across London and a 120-mile radius, and in Manchester, Birmingham, Leeds and Bristol, including TP-710 fan coil and underfloor heating controllers, Touch-7 and Touch-4 touchscreens, BACnet networks and NetMaster. In London and the Home Counties every job starts with a free site visit and ends with a digital report with photos.

The TP-710 is Titan Products' BACnet controller family for fan coil units and underfloor heating. In a block of flats there is usually one per flat, above the ceiling, controlling the fan coil valves and fan speed in response to the touchscreen on the wall.

Usually because the touchscreen has lost power or lost communication with the controller in the ceiling void. It is rarely the screen itself. We test the supply and the link to the controller before replacing anything.

Sometimes. The most common causes are a valve actuator stuck open, setpoint limits set wrongly at commissioning, or a problem with the heat supply from the building's communal heating or heat network. We check the controller, the valves, the fan coil and the supply together so the right thing is fixed first time.

Titan controllers in a block are linked on a BACnet MS/TP cable run. A damaged cable, a loose termination, an address clash or one failed controller can take several flats off the network. We test each run and bring the missing flats back online.

Yes. We clean filters, check condensate drains and trays, test valves and actuators and check the fan, on the same visit as the controls. One contractor for both avoids the controls engineer and the mechanical engineer blaming each other.

Titan controllers communicate over BACnet, an open protocol, so they can be connected to a building-wide BMS such as Trend or Tridium Niagara, or monitored remotely through Titan's ICON cloud platform. We check what is installed and recommend the simplest route.

In London, yes; in the Home Counties it is free for larger jobs, and for smaller ones we quote the visit first. An engineer comes to see the Titan network and a sample of flats at no cost, and you receive a digital report with photos and a clear recommendation. Outside London, start by sending us photos of the controllers and touchscreens.

Yes. Our emergency line is answered day and night, including weekends. In London we aim to attend the same day when a flat has no heating, no hot water or no cooling, and in the Home Counties we can usually be on site within a day.

Sometimes, depending on the building. Where the managing agent's IT and the system allow it, we look at NetMaster remotely to see which flats are offline or in alarm before we travel. The route is agreed first, with named accounts and no shared passwords. Where remote access is not set up, we attend in person.

Emergency line. Same-day response across London.

Something broken right now? Speak to an engineer.

A clear price before any work starts, and a written report after. For planned servicing, compliance certificates and contracts, WhatsApp us and we will call you back.

REFCOM certified REF1024168Gas Safe registered engineersSafeContractor approvedNICEIC certified electricians

Emergency HVAC and heating repair in London