Lutron · KNX · Rako · Casambi · Philips Hue · London

Smart Lighting Installation in London: Scenes, Keypads and Whole-Home Control

Lighting scenes, elegant keypads and dimming that never flickers, for London townhouses, mansion flats and new apartments. Installed by NICEIC certified electricians, programmed, handed over with the files, and looked after by the same team.

Call +44 783 456 2366
  • Free site visit in London
  • Flicker-free LED dimming
  • Period homes and new builds
Drawing room of a Belgravia townhouse in London on an evening lighting scene, with picture lights, a dimmed chandelier and a lighting keypad by the doors

Who installs smart lighting in London homes?

Mainteniq designs, installs and supports smart lighting across London, from single rooms to whole houses and apartment buildings, in Kensington, Chelsea, Belgravia, Mayfair, Hampstead and the rest of London and the Home Counties. We work with Lutron, KNX, Rako, Casambi and Philips Hue, and alongside the dealer where a home already runs on Control4 or Crestron.

Good smart lighting is mostly good electrical work: the right dimmer for each LED fitting, keypads where people expect switches, and scenes set up for how the family actually lives. Our NICEIC certified electricians do the wiring, and we join the lighting up with heating, blinds and audio on a whole-home system when you want one. For apartments and residential towers see smart homes for luxury apartments.

Problems we are called about

Smart Lighting Problems We Fix

Most lighting complaints come back to the same few causes: the wrong dimmer, the wrong place for a control, or a system nobody can change.

London flat living room with LED cove lighting above the curtains, a floor lamp and table lamps
Cove, lamps and wall lights together: the layered lighting a scene keypad controls with one press.

LED lights flicker or buzz when dimmed

Our fix: Dimmers matched to each LED driver and fitting, tested across the whole dimming range before handover.

The wall switch kills the smart bulbs

Our fix: Smart dimmers and keypads instead of smart bulbs, so the switch on the wall always works.

A row of switches nobody understands

Our fix: One engraved keypad with named scenes replaces the bank of switches.

No neutral at the switch

Our fix: Retrofit dimmers and wireless keypads chosen for older wiring, so walls are only chased where they must be.

Everything is in an app the family hates

Our fix: Keypads first, app second. Everyone can use the lights without a phone.

Lights come back on wrong after a power cut

Our fix: Power-on behaviour set for every circuit, so the house is not lit up at 3am.

Scenes nobody can change

Our fix: We take over the system, recover or rebuild the programme, and hand you the files.

Garden and outdoor lights on separate timers

Our fix: Garden, facade and security lighting brought into the same scenes and schedules.

How a Smart Lighting Installation Works

From the first conversation to the evening you press 'Dinner' and the room just looks right.

  1. 1

    Site visit

    We look at the rooms, the fittings, the wiring and how you use each space.

  2. 2

    Lighting plan

    Circuits, scenes and keypad positions agreed room by room.

  3. 3

    Platform choice

    Lutron, KNX, Rako, Casambi or Hue, chosen for the home and the budget.

  4. 4

    Wiring or retrofit

    New circuits for a refurbishment, or retrofit dimmers that use the existing wiring.

  5. 5

    Keypads and dimmers

    Installed by NICEIC certified electricians and certified to BS 7671.

  6. 6

    Scenes programmed

    Morning, evening, dinner, cinema, all off, set with you in the room.

  7. 7

    Walkthrough

    Everyone in the home shown how it works, plus a one-page guide.

  8. 8

    Support

    Changes to scenes and faults handled by the same local team.

Townhouses and mansion flats

Smart Lighting in Period Homes: Belgravia, Kensington and Chelsea

Older London homes need lighting that is modern to use but invisible in the room. These are the details we plan for.

Layered lighting with a linear LED cove, downlights and a brushed-metal keypad in a high-end London apartment
Layered lighting, one keypad: the same principles work in a new apartment and a period home.

Listed buildings and conservation areas

Wireless keypads and dimmers where walls and plasterwork should not be disturbed. Listed building consent is needed for works that affect a listed building's character.

Picture lights and chandeliers

Picture lights, wall lights and chandeliers dimmed smoothly and brought into the room's scenes.

Trimless downlights, used sparingly

Discreet downlights for function, with lamps and wall lights for atmosphere.

Shutters, blinds and curtains

Motorised curtains and blinds on the same keypad as the lights.

Engraved keypads

Finishes to match the ironmongery, engraved with scene names so nobody has to guess.

Whole-home control later

Lighting chosen so heating, blinds and audio can be added without starting again.

From our jobs

Lighting and Controls From Our Jobs

Real photos from London homes we have worked in: the keypads and touchscreen people use, the control modules behind them, and the lighting they run.

Brushed-steel lighting keypad with scene buttons and three dimmer knobs in a London home
A brushed-steel keypad: scene buttons above, dimmers below.
Gira KNX and Loxone lighting control modules mounted in a utility cupboard in a London flat
Lighting control modules (Gira KNX and Loxone) in a flat’s utility cupboard.
Smart home control touchscreen installed by Mainteniq on the wall of a London home, showing lighting for every room, with a brushed-metal keypad beside it
A smart home control touchscreen we installed: every room's lighting on one screen, with a keypad beside it for everyday use.
Living and dining room in a London apartment with LED cove lighting around the ceiling, downlights and floor-to-ceiling windows
Cove lighting and downlights in a London apartment, set up as one room scene.

Rules for lighting work

What the Rules Say About Lighting Work in a London Home

Smart lighting is electrical work. These are the rules that apply, and how we meet them.

Wiring standard

Electrical work is carried out to BS 7671, the IET Wiring Regulations, by NICEIC certified electricians.

Building Regulations Part P

Some electrical work in homes, such as new circuits, is notifiable under Part P. A registered competent person can self-certify it and you receive the certificate.

Certificates

You receive an Electrical Installation Certificate or Minor Works Certificate for the work, as appropriate.

Listed buildings

Works that affect the character of a listed building need listed building consent from the council. We plan wireless options to keep alterations to a minimum.

Who can change the lighting

We are not a Control4, Crestron or Lutron dealer, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route, so we look after everything around them (wiring, network, power, heating and the HIU) and tell you up front what we can and cannot change.

Lighting Systems We Work With

We recommend the platform that suits the home and the budget, and our team also works on Rako lighting systems. We are not a Control4, Crestron or Lutron dealer, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route, so we look after everything around them (wiring, network, power, heating and the HIU) and tell you up front what we can and cannot change.

How Smart Lighting Installation Works With Us

  1. 1

    Free site visit

    We look at the rooms, the fittings and the wiring, and talk through how you want the lighting to work. Free in London; in the Home Counties, free for larger jobs.

  2. 2

    Digital report with photos

    What we found, what it means and what to do first, sent by email.

  3. 3

    Clear recommendation

    Explained in plain English and priced as a fixed quote before any work starts.

  4. 4

    Work done and recorded

    Every visit ends with a new report, readings and a fresh backup of the system.

Digital reports, not paperwork

A photographed PDF report after every smart lighting handover

No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.

You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.

  • Before and after photosEvery unit and fault photographed on site
  • Readings and checksTemperatures, pressures and test results recorded
  • Work done and next stepsWhat was fixed, what needs quoting, when we return
  • Sent the same dayDigital PDF report by email, ready to forward

Example layout. Completed on site in Maintivo.

Qualifications Behind Our Smart Lighting Installation Work

SafeContractor ApprovedMAINTENIQ LTD, SSIP certificate NZ2372
NICEIC certified electriciansWiring, keypads and lighting circuits to BS 7671
NICEIC Domestic VentilationDV-02 certified, MVHR and extract ventilation
SAV Advanced HIU Service EngineerHeating controls that work with heat interface units
REFCOM F-Gas certifiedREF1024168, air conditioning and fan coil units
Building controls trainedInnotech / Uxbridge College: controls programming and fault-finding

Where We Carry Out Smart Lighting Installation

All 32 London boroughs and the Home Counties, with a free site visit in London (and in the Home Counties for larger jobs), including Kensington, Chelsea, Belgravia, Mayfair, Knightsbridge, Hampstead, Notting Hill and Richmond.

Areas we cover

What customers say on Google

5.0Google rating
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”

Deborah L.

Google review

“Excellent service. Price assessment: reasonable price.”

Attila B.

Google review

“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”

Ben

Google review

Read all reviews on Google

Thinking About Smart Lighting?

Tell us about the rooms. We visit for free, send a report with photos and options, and give you a fixed quote before any work starts.

WhatsApp us Call

Smart Lighting: Common Questions

Smart lighting lets you control lights by scene rather than one switch at a time. A keypad by the door can set a whole room, or the whole home, to 'evening', 'dinner' or 'all off', with dimming, schedules and control from an app or voice assistant. Unlike smart bulbs, a proper smart lighting system uses smart dimmers and keypads, so the wall switch always works.

Usually because the dimmer does not suit the LED driver or fitting, or the load is below the dimmer's minimum. We match a dimmer to each circuit and test it across the whole dimming range before handover.

Often, yes. Retrofit dimmers and wireless keypads work with existing wiring, including older homes without a neutral at the switch. A full rewire is only needed for wired systems such as KNX, which suit refurbishments and new builds.

Yes, with care. We use wireless keypads and dimmers to keep alterations to walls and plasterwork to a minimum. Works that affect the character of a listed building need listed building consent from the council, so we plan the scheme with that in mind.

Some electrical work in homes, such as installing new circuits, is notifiable under Part P. Our NICEIC certified electricians work to BS 7671, and you receive the appropriate electrical certificate for the work.

Lutron, KNX, Rako, Casambi and Philips Hue. Our team also works on existing Rako lighting systems. Where a home already runs its lighting on Control4, Crestron or Lutron RadioRA 3 or HomeWorks, reprogramming goes through the dealer or the maker's authorised route, because we are not a dealer for those platforms.

No, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route. We look after everything around them, such as the wiring, network, power, heating and HIU, and tell you up front what we can and cannot change.

Yes. We cover all 32 London boroughs and the Home Counties, including Kensington, Chelsea, Belgravia, Mayfair, Knightsbridge, Hampstead, Notting Hill and Richmond. Site visits are free in London and, in the Home Counties, free for larger jobs.

Emergency line. Same-day response across London.

Something broken right now? Speak to an engineer.

A clear price before any work starts, and a written report after. For planned servicing, compliance certificates and contracts, WhatsApp us and we will call you back.

REFCOM certified REF1024168Gas Safe registered engineersSafeContractor approvedNICEIC certified electricians

Emergency HVAC and heating repair in London