Luxury apartments · Penthouses · Residential towers · London

Smart Home Installation for Luxury Apartments and Residential Towers in London

Smart lighting, heating, blinds, door entry and whole-apartment control for high-end flats, penthouses and whole residential towers. We work with owners, developers, managing agents and build-to-rent operators, one flat at a time or across the whole building, and we stay to maintain it.

Call +44 783 456 2366
  • Free site visit in London
  • One flat or a whole tower
  • Logins and files handed over
Luxury apartment in a London residential tower at dusk with layered smart lighting, motorised curtains and a lighting keypad by the door, Mainteniq London

Who installs smart home systems in London apartments and residential towers?

Mainteniq installs and maintains smart home systems in London apartments, from a single penthouse to every flat in a residential tower, including high-end towers in London. We fit smart lighting and scene keypads, smart heating that works with the building's heat interface units or fan coil units, motorised blinds and curtains, smart locks and video door entry, leak sensors, and whole-apartment systems on open platforms such as KNX and Loxone. Where a building already runs on Control4, Crestron or Lutron we work alongside the dealer, because we are not a dealer for those platforms.

Apartments are not houses. The heating usually comes from a communal heat network through an HIU, cooling from fan coil units, fresh air from MVHR, and the building has its own BMS. Those are our everyday maintenance work, so the smart controls actually match the plant behind the walls. For houses and smaller set-ups see smart home installation.

Problems we are called about

Smart Home Problems in London Apartments, and How We Fix Them

Most smart apartment problems are not the gadgets. They come from concrete walls, communal heating and systems handed over with nobody to support them.

Electrician wiring smart lighting dimmer and relay modules in a flat's utility cupboard, with a network switch and labelled data cables above
Lighting modules, network and controller in one cupboard per flat: tidy, labelled and easy to support.

Wi-Fi dead spots in a concrete tower

Our fix: Wired access points in each flat and a separate network for smart devices, so locks and sensors stop dropping off.

The thermostat does not work with the HIU

Our fix: Controls chosen for the heat interface unit or fan coil units and wired by heating engineers who service SAV, Evinox, Danfoss, Cetetherm and other HIUs every week, not guessed from a manual.

Lights, blinds and cooling on different apps

Our fix: One app and one set of keypads for lighting, blinds, heating and cooling in the flat.

Installer gone after handover

Our fix: We take the system over, document what is installed and look after it from then on.

Every flat set up on the developer's account

Our fix: Each flat moved onto an owner or resident account, with its own logins and handover pack.

Residents cannot use the keypad

Our fix: Simple scenes, labelled keypads that still work like switches, and a one-page guide for each flat.

Different kit in every flat

Our fix: One standard specification for the building, so spares, support and updates stay simple.

Door entry not joined up

Our fix: Video door entry and smart locks set up in line with the building's access and concierge arrangements.

How a Whole-Building Smart Home Rollout Works

The same approach we use for planned maintenance in residential towers: one specification, one programme, one report per flat.

  1. 1

    Site visit and survey

    The flats, risers, wiring routes, Wi-Fi, heating plant and door entry.

  2. 2

    Standard specification

    One specification per flat type, agreed with the developer or managing agent.

  3. 3

    Sample flat first

    Installed and signed off before the rest, so everyone sees exactly what they are getting.

  4. 4

    Floor-by-floor rollout

    Resident access and time slots arranged with the building team.

  5. 5

    Commissioning per flat

    Every scene, blind, heating zone and lock tested before we leave.

  6. 6

    Handover pack per flat

    Logins, project files, a handover sheet and a resident guide.

  7. 7

    Building summary

    A report for the developer or managing agent, flat by flat.

  8. 8

    Ongoing support

    Faults, changes and updates handled by the same team.

Already living with a system nobody supports? See smart home maintenance and support.

For developers and managing agents

Planning Smart Homes in a Residential Tower

Smart homes are cheapest and most reliable when they are planned before first fix. These are the decisions that matter most in a tower.

Wall-mounted network rack in a high-end London flat with patch panel, switch, smart home controller and UPS, cables neatly labelled
Space for a small rack in every flat makes the network, and everything on it, far more reliable.

Cable before first fix

Data cabling, keypad back boxes and blind power planned with the electrical design, not chased in later.

A network in every flat

Space for a small rack, wired access points and a separate network for smart devices.

Join up the building services

Controls matched to the HIU, fan coil units and MVHR, so residents are comfortable without fighting the plant.

Door entry and access

Video entry, smart locks and fobs agreed with the building's security and concierge arrangements.

One specification, one set of spares

The same platform and devices across the building, so support and replacements are simple.

Handover and aftercare

Project files and logins for the owner, and a maintenance plan so the system keeps working.

Support through the defects period

Developers often struggle to support smart kit once the site team has gone. We can be the single contact for residents' smart home faults through the defects period and after it, logged flat by flat.

An as-built pack for every flat

What is actually installed in each flat: device list, keypad and scene schedule, network details, logins in the owner's name and the project file, so the next person can support it.

Send us the drawings

For a new tower or a refurbishment, send the electrical drawings and the flat types. We will tell you what to plan before first fix. Compare platforms on our KNX, Control4, Crestron and Lutron page.

From our jobs

Our Work in London Apartments

Real photos from our jobs: the climate and touch panels residents use every day, and the plant cupboards those controls have to work with.

Wall touchscreen in a London apartment showing the temperature of each bedroom and the living room
A whole-flat climate touchscreen: every room’s temperature on one panel.
AMX Modero X touch panel mounted on the wall of a London apartment
An AMX touch panel in a London apartment.
Mainteniq London engineer in a branded shirt working in a high-end London apartment with marble walls
At work in a high-end London apartment.
Vent-Axia MVHR unit mounted above the consumer unit and data cabinet in a utility cupboard in a London flat
An MVHR unit above the consumer unit and data cabinet in a London flat.

What buyers and residents expect

What a Smart Apartment Has to Get Right

High-end buyers and tenants expect the flat to feel effortless. These are the points we check on every apartment.

Lighting

Scenes for the whole flat and keypads that still work like normal switches, so guests and cleaners are never stuck in the dark.

Heating and cooling

Controls that suit the HIU or fan coil units, with sensible limits so the flat never overheats or goes cold.

Security and privacy

Since 29 April 2024, UK law (the PSTI regime) bans default passwords on connectable products and requires makers to publish how long they will get security updates. We set unique passwords and record each device's update period.

Ownership

Logins and project files in the owner's name, never ours, so nobody is locked to one installer.

Support

A local maintenance team that answers when something stops working, not a one-off installer, with a 24/7 emergency line, nights and weekends included.

Who can change the system

We are not a Control4, Crestron or Lutron dealer, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route, so we look after everything around them (wiring, network, power, heating and the HIU) and tell you up front what we can and cannot change.

Product security rules: Product Security and Telecommunications Infrastructure (PSTI) regime, in force in the UK since 29 April 2024.

Smart Home Systems We Install

From app-based kit for a single flat to wired whole-apartment systems. We are not a Control4, Crestron or Lutron dealer, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route, so we look after everything around them (wiring, network, power, heating and the HIU) and tell you up front what we can and cannot change.

KNX Control4 Crestron Lutron Loxone Rako CasambiPhilips HuetadoDrayton WiserHoneywell evohomeYaleNukiRingAmazon AlexaGoogle HomeApple HomeCompare KNX, Control4 and Crestron

How Smart Apartment Installation Works With Us

  1. 1

    Free site visit

    We look at the flat or the building, the wiring, Wi-Fi, heating and door entry, and talk through what you want. Free in London; in the Home Counties, free for larger jobs.

  2. 2

    Digital report with photos

    What we found, what it means and what to do first, sent by email.

  3. 3

    Clear recommendation

    Explained in plain English and priced as a fixed quote before any work starts.

  4. 4

    Work done and recorded

    Every visit ends with a new report, readings and a fresh backup of the system.

Digital reports, not paperwork

A photographed PDF report after every smart apartment handover

No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.

You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.

  • Before and after photosEvery unit and fault photographed on site
  • Readings and checksTemperatures, pressures and test results recorded
  • Work done and next stepsWhat was fixed, what needs quoting, when we return
  • Sent the same dayDigital PDF report by email, ready to forward

Example layout. Completed on site in Maintivo.

Qualifications Behind Our Smart Apartment Installation Work

SafeContractor ApprovedMAINTENIQ LTD, SSIP certificate NZ2372
NICEIC certified electriciansWiring, keypads and lighting circuits to BS 7671
NICEIC Domestic VentilationDV-02 certified, MVHR and extract ventilation
SAV Advanced HIU Service EngineerHeating controls that work with heat interface units
REFCOM F-Gas certifiedREF1024168, air conditioning and fan coil units
Building controls trainedInnotech / Uxbridge College: controls programming and fault-finding

Where We Carry Out Smart Apartment Installation

All 32 London boroughs and the Home Counties. Site visits are free in London and, in the Home Counties, free for larger jobs. That includes the central London towers and mansion blocks of Westminster, Mayfair, Belgravia, Kensington and Chelsea, the City, Canary Wharf, Nine Elms and Battersea.

Areas we cover

What customers say on Google

5.0Google rating
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”

Deborah L.

Google review

“Excellent service. Price assessment: reasonable price.”

Attila B.

Google review

“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”

Ben

Google review

Read all reviews on Google

Planning Smart Homes for an Apartment or a Whole Tower?

Tell us about the flat or the building. We visit for free, send a report with photos, and give you a fixed quote for one apartment or the whole tower.

WhatsApp us Call

Smart Homes for Apartments: Common Questions

Yes. Most existing apartments can take smart lighting, heating, blinds, locks and sensors without major work, using retrofit dimmers, wireless keypads and the existing wiring. Wired whole-apartment systems such as KNX are easiest during a refurbishment. We visit for free, check the wiring, Wi-Fi and heating, and tell you what will work in your flat.

Yes. We work with developers, managing agents and build-to-rent operators on whole buildings: one standard specification per flat type, a sample flat signed off first, then a floor-by-floor rollout with resident access arranged with the building team, and a handover pack for every flat.

It can, if the controls are chosen for the HIU and wired properly. Many apartment problems come from a smart thermostat that does not suit the HIU or fan coil units. Our heating engineers, including SAV Advanced HIU Service Engineers, choose and wire the controls so they work with the building's plant.

Smart lighting and keypads on Lutron, KNX, Casambi and Philips Hue, smart heating such as tado, Drayton Wiser and Honeywell evohome, smart locks such as Yale and Nuki, video door entry, leak sensors, motorised blinds and curtains, and whole-apartment systems on open platforms such as KNX and Loxone. Where a building already runs on Control4, Crestron or Lutron RadioRA 3 or HomeWorks, changes go through the dealer or the maker's authorised route, because we are not a dealer for those platforms.

No, and we say so before any visit. Open systems such as KNX, Loxone, Casambi and Philips Hue we can install, take over and change fully, and you keep the project files. Closed systems such as Control4, Crestron and Lutron RadioRA 3 and HomeWorks can only be reprogrammed with the dealer's access or through the maker's authorised handover route. We look after everything around them, such as the wiring, network, power, heating and HIU, and tell you up front what we can and cannot change.

Yes. Developers often struggle to support smart kit once the site team has left. We can be the single contact for residents' smart home faults through the defects period and after it, with every call logged flat by flat, and we hand over an as-built pack for each flat: the device list, keypad and scene schedule, network details, logins in the owner's name and the project file.

The owner. Every app and hub is set up on an owner account for the property, and for whole-apartment systems the project or programming file is handed over, so you are never locked to one installer.

Yes. We are a maintenance company, so we offer planned servicing for smart home systems, with updates, battery replacements, scene testing and a report after every visit, and priority call-outs for plan clients on our 24/7 emergency line, nights and weekends included. We also take over systems other installers left behind.

It depends on the flat and the level of control. App-based essentials cost the least, smart lighting and blinds sit in the middle, and a wired whole-apartment system is priced room by room. For whole buildings we price per flat type. After a free site visit you receive a fixed quote.

Emergency line. Same-day response across London.

Something broken right now? Speak to an engineer.

A clear price before any work starts, and a written report after. For planned servicing, compliance certificates and contracts, WhatsApp us and we will call you back.

REFCOM certified REF1024168Gas Safe registered engineersSafeContractor approvedNICEIC certified electricians

Emergency HVAC and heating repair in London