Tridium Niagara · AX · N4 · JACE · London

Tridium Niagara BMS Engineers in London: AX, N4 and JACE

Servicing, fault finding and upgrades for Niagara building management systems, from Niagara AX stations that nobody can open any more to current Niagara 4 and JACE controllers, in offices, residential blocks and heat networks across London and the Home Counties.

Call +44 783 456 2366
  • Free site visit in London
  • Digital report with photos
  • Niagara AX to N4
Mainteniq London controls engineer with a laptop connected to a network controller in a BMS panel in a basement plant room

Who repairs and services Tridium Niagara and JACE controllers in London?

Mainteniq services, repairs and upgrades Tridium Niagara building management systems across London and a 120-mile radius, and in Manchester, Birmingham, Leeds and Bristol. We work on Niagara AX and Niagara 4 stations, JACE controllers and Niagara supervisors, and we migrate Niagara AX systems to Niagara 4 in stages while the building keeps running.

When a JACE controller fails or drops off the network, we test the JACE, its power supply and the field bus first, recover the station from the last backup or rebuild it, and replace the JACE only where it is faulty or no longer supported, such as moving from a JACE running Niagara AX to a JACE 8000 on Niagara 4. You get a report with photos and a fixed price before any part is ordered.

Niagara is not one controller but a software framework that sits over the building's controllers and pulls them into one system, often from several manufacturers at once. That makes it powerful, and it also means many London buildings have a Niagara system nobody fully understands. We take those systems over, back them up, keep them serviced and plan what comes next with you. Niagara is one of the platforms we specialise in; see all building management systems we work on.

Know your system

Which Niagara Is in Your Building?

Two things decide your options: the Niagara software version, and the JACE hardware it runs on. Send us a photo of the JACE and a screenshot of the login page and we will tell you both.

  1. AX

    Niagara AX

    Unsupported

    Still running in many London buildings. Licences can no longer be moved or replaced, and the old Java-based screens will not open in a modern browser.

  2. N4

    Niagara 4

    Current

    Where AX systems move to. Browser-based HTML5 screens, user accounts and encrypted connections. Version 4.15 is the final, long-term support release of Niagara 4.

  3. N5

    Niagara 5

    Next generation

    Tridium's next platform. Stations move to it from Niagara 4.15, and only on hardware that supports it, so it belongs in the plan now.

And the JACE it runs on

Older AX-era JACEs

Many cannot run Niagara 4 at all, so an AX to N4 migration usually includes replacing them.

JACE 8000

Runs Niagara 4 up to 4.15, but cannot move to Niagara 5. Ordering has ended in Europe and hardware support is planned to end in 2028.

JACE 9000

The current JACE. Same footprint and wiring positions as the JACE 8000, runs Niagara 4.13 or later and is built for Niagara 5.

Same framework, different badge

Your BMS May Be Niagara Under Another Name

Tridium licenses Niagara to other manufacturers, who sell it under their own names. If your front end says one of these, it is almost certainly Niagara underneath, and the same AX to N4 and JACE questions apply.

Niagara Framework

Honeywell WEBs

WEBs-AX and WEBs-N4 are Honeywell's versions of Niagara AX and Niagara 4.

Trend IQVISION

Trend's supervisor is built on Niagara, sitting over IQ controllers.

Trend BMS

Distech EC-Net

Distech's EC-Net supervisors and controllers run on the Niagara Framework.

Tridium / Vykon

Systems sold under Tridium's own name, often with mixed third-party controllers below.

The Niagara Problems We Are Called About Most

Most of these come from an AX system left running for years after the installer moved on. All of them can be fixed, and most are cheaper to fix before the next failure than after it.

Mainteniq London photo of an older BMS network controller still running in a dusty control panel, typical of Niagara AX systems
An older network controller, still running years after installation.

Screens will not open

The AX graphics need a Java applet that modern browsers no longer run, so nobody can see the system.

No passwords

Platform and station logins left with the installer, so the building cannot get into its own BMS.

Licence stuck to dead hardware

An AX JACE fails and its licence cannot be moved to a replacement, so the site is offline.

Devices dropping off

BACnet, Modbus or LON devices going offline under the JACE, so plant runs without supervision.

No station backup

The station was never backed up, so one failed JACE or PC means rebuilding from nothing.

Supervisor on an old PC

The Niagara supervisor runs on an ageing PC or server that is out of support and out of space.

Ownership and security

Who Holds the Niagara Licences, Passwords and Remote Access?

“The integrator has the licences, the passwords and the only way in.” On Niagara this is common, because each licence is tied to a particular JACE or supervisor and is usually bought through the installer.

When we take over or migrate a Niagara system, we make sure the building holds what it needs. Licences and software maintenance are registered to the building wherever Tridium's licensing allows it; where they cannot be moved, we tell you at the survey. Passwords, station backups and the graphics are handed to you, and any remote route is agreed with your IT team, in line with the IET Code of Practice for Cyber Security in the Built Environment and NCSC guidance.

Licences and passwords

Registered to the building wherever the licence allows, with administrator access held by you, not by us.

The supervisor PC

Many Niagara supervisors still run on Windows 10, unsupported since 14 October 2025. We move them to a supported system.

Remote access IT approves

Niagara stations kept off the open internet. Remote access only through a route your IT team approves, with named accounts.

Controls and plant together

We maintain the plant Niagara controls as well, from AHUs and fan coils to heat pumps, so a comfort fault is followed to the valve, not passed on.

What we do

Tridium Niagara BMS Services

One team for the Niagara software, the JACEs and the plant they control, from a single device that has dropped off the network to a full AX to N4 migration.

Niagara servicing

Planned visits: stations and JACEs checked, devices online, histories and alarms working, backups taken and kept by the building.

BMS maintenance

Fault finding

Stations down, devices offline, drivers failing, plant not responding to the BMS. Traced to the cause and fixed.

AX to N4 migration

Niagara AX stations migrated to Niagara 4 in stages, with the strategies, histories and alarms checked against the real plant.

BMS upgrades

JACE replacement

Old JACEs that cannot run Niagara 4 replaced, and a plan for JACE 8000s before their support ends.

Graphics and dashboards

Browser-based HTML5 graphics drawn to match the plant that is actually installed, with alarm routing that reaches a person.

Monitoring

We set up remote monitoring and smart analytics once the system is on Niagara 4.

Migrating Niagara AX to Niagara 4

AX cannot move straight to Niagara 5: every AX station has to go to Niagara 4 first. We do it one JACE at a time, while the building keeps running. The field controllers, sensors and wiring usually stay; the software, the screens and any JACE that cannot run Niagara 4 change.

Niagara AX
  • Unsupported software
  • Java screens that will not open
  • Licences that cannot be moved
  • Older JACEs, often undocumented
Niagara 4
  • Supported software
  • HTML5 screens in any browser
  • User accounts and encrypted connections
  • Backups and passwords held by the building
  • Ready for remote monitoring
  1. 1

    Back up everything

    Every station, JACE and supervisor backed up before anything is touched, with the passwords handed to the building.

  2. 2

    Check hardware and licences

    Which JACEs can run Niagara 4, which need replacing, and what licences and software maintenance are needed.

  3. 3

    Migrate the stations

    AX stations converted to Niagara 4, then reviewed by an engineer: the conversion tool gets most of the way, not all of it.

  4. 4

    Rebuild the graphics

    AX screens redrawn as HTML5 graphics that open in any browser, matched to the plant on site.

  5. 5

    Test every point

    Sensors, valves, pumps and alarms tested against the plant, one JACE at a time, while the building keeps running.

  6. 6

    Hand over

    Backups, user accounts and a points list held by the building, not by us, with a photo report of the finished work.

See how a staged BMS upgrade works from survey to handover.

Plan, don't panic

Dates Every Niagara Building Should Know

Nothing stops working on these dates, but support, spare hardware and upgrade routes do run out. A building with a plan upgrades on its own timetable; a building without one upgrades after a failure.

  1. 2023

    Niagara AX licences can no longer be moved or replaced.

  2. 2025

    JACE 8000 ordering ended in Europe at the end of the year.

  3. 2026

    Niagara 5 introduced as Tridium's next-generation platform.

  4. 2028

    Planned end of Niagara 4 and of JACE 8000 hardware support.

What this means for you: an AX system should be migrated now. A Niagara 4 system on JACE 8000s needs a plan for the next few years. A system on JACE 9000s and Niagara 4.15 is in good shape. Your free site visit report tells you which one you are.

How It Works

  1. 1

    Free site visit

    We look at the JACEs, the supervisor, the station versions and the plant. Free in London; in the Home Counties, free for larger jobs, otherwise we quote the visit first.

  2. 2

    Digital report with photos

    Which Niagara version and hardware you have, what is working and what is at risk, sent by email.

  3. 3

    Clear recommendation

    Service contract, repair, AX to N4 migration in stages, or a JACE plan, explained in plain English.

  4. 4

    Planned visits

    Servicing on an agreed schedule, with a new report and a fresh station backup every visit.

Digital reports, not paperwork

A photographed PDF report after every Niagara BMS visit

No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.

You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.

  • Before and after photosEvery unit and fault photographed on site
  • Readings and checksTemperatures, pressures and test results recorded
  • Work done and next stepsWhat was fixed, what needs quoting, when we return
  • Sent the same dayDigital PDF report by email, ready to forward

Example layout. Completed on site in Maintivo.

Qualifications Behind the Work

SafeContractor ApprovedMAINTENIQ LTD, SSIP certificate NZ2372
BMS Control Systems trainedInnotech / Uxbridge College: DDC, programming, iComm, fault-finding
REFCOM F-Gas certifiedREF1024168, air conditioning and refrigerant work
SAV Advanced HIU Service EngineerHeat interface units in communal heating
NICEIC Domestic VentilationDV-02 certified
NICEIC certified electriciansElectrical work; gas work by Gas Safe registered engineers

Where We Work on Niagara Systems

All 32 London boroughs, with a free site visit, and a 120-mile radius of the Home Counties, where the visit is free for larger jobs and quoted first for smaller ones. We also take on Niagara maintenance, upgrades and new installations in these cities:

Outside London? Send us your BMS details

What customers say on Google

5.0Google rating
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”

Deborah L.

Google review

“Excellent service. Price assessment: reasonable price.”

Attila B.

Google review

“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”

Ben

Google review

Read all reviews on Google

Book a Free Niagara BMS Site Visit

In London an engineer comes to see your Niagara system for free; in the Home Counties it is free for larger jobs, and for smaller ones we quote the visit first. You get a digital report with photos, the version and hardware you have, and a clear recommendation, with no obligation to go ahead.

WhatsApp us Call

Tridium Niagara BMS: Common Questions

Mainteniq repairs, services and upgrades Tridium JACE controllers and Niagara AX and Niagara 4 systems in London and a 120-mile radius. We test the JACE, its power supply and the field bus, recover the station from a backup or rebuild it, and replace the JACE only where it is faulty or unsupported, with a report and a fixed price before any part is ordered.

Yes. Mainteniq services, repairs and upgrades Tridium Niagara building management systems across London and a 120-mile radius, and in Manchester, Birmingham, Leeds and Bristol, including Niagara AX and Niagara 4 stations, JACE controllers and Niagara supervisors. In London and the Home Counties every job starts with a free site visit and ends with a digital report with photos.

Yes. We migrate Niagara AX stations to Niagara 4 one JACE at a time while the building keeps running. Every station is backed up first, the converted stations are reviewed by an engineer, the screens are rebuilt as HTML5 graphics and every point is tested against the plant before handover.

Niagara AX screens rely on a Java applet, and modern web browsers no longer run Java applets. The system is usually still controlling the plant, but nobody can see it. Migrating to Niagara 4 replaces those screens with HTML5 graphics that open in any browser.

Not yet, but it needs a plan. The JACE 8000 runs Niagara 4 up to version 4.15, which is the final Niagara 4 release, and it cannot move to Niagara 5. Ordering has ended in Europe and hardware support is planned to end in 2028. Its replacement, the JACE 9000, uses the same footprint and wiring positions, which keeps the swap straightforward.

Niagara 5 is Tridium's next-generation platform. Most buildings do not need it today. What matters now is getting off Niagara AX, moving Niagara 4 stations to version 4.15, and making sure new JACEs are JACE 9000s so the route to Niagara 5 stays open.

Yes. Honeywell WEBs, Trend IQVISION and Distech EC-Net are all built on the Tridium Niagara Framework, so the same version, JACE and upgrade questions apply. Send us a screenshot of the login page and we will confirm what you have.

Yes. We start by recovering access, backing up every station and JACE, and documenting what is installed, with the passwords and backups held by the building rather than by us. Then we keep it serviced while we plan any upgrade with you.

In London, yes; in the Home Counties it is free for larger jobs, and for smaller ones we quote the visit first. An engineer comes to see your Niagara system at no cost and you receive a digital report with photos, the software version and hardware you have, and a clear recommendation. Outside London, start by sending us photos of the JACE and panel.

No. Every Niagara AX station has to be migrated to Niagara 4 first. With Niagara 4 planned to reach end of life in Q3 2028 and Niagara 5 to follow, we plan AX to N4 migrations so the next step to Niagara 5 is straightforward, including fitting JACE 9000s where a JACE has to be replaced.

The building. Niagara licences are tied to a particular JACE or supervisor and are often bought through the installer. When we take over or migrate a system, licences and software maintenance are registered to the building wherever Tridium's licensing allows it, and where they cannot be moved we tell you at the survey. Passwords, station backups and graphics are handed to you in every case.

Emergency line. Same-day response across London.

Something broken right now? Speak to an engineer.

A clear price before any work starts, and a written report after. For planned servicing, compliance certificates and contracts, WhatsApp us and we will call you back.

REFCOM certified REF1024168Gas Safe registered engineersSafeContractor approvedNICEIC certified electricians

Emergency HVAC and heating repair in London