SAV Systems · FlatStation · London
SAV HIU Service and Repair in London
Servicing, repairs and replacement for SAV heat interface units, the FlatStations supplied by SAV Systems, in London flats, build-to-rent blocks and heat networks, by SAV certified engineers, with a 24/7 HIU call-out line.
- SAV certified engineers
- Free site visit in London
- 24/7 HIU call-out

Who services SAV HIUs in London?
Mainteniq services, repairs and replaces SAV heat interface units across London and the Home Counties. Our engineers hold the SAV Advanced HIU Service Engineer certificate (PERS-30839), carry the SAV Advanced Service Engineer card that SAV tells residents to ask to see, and are manufacturer approved for SAV and Danfoss units, and Evinox trained and certified. Every visit ends with a report with photos and the readings taken, and our emergency line runs 24/7 for no heating or no hot water.
SAV Systems is a UK company that supplies and supports Danfoss FlatStation heat interface units and trains engineers to service them. So when a managing agent or a building manual talks about an SAV HIU, it is usually a Danfoss FlatStation. SAV tells residents that the first call for a fault should always be the building's service or maintenance provider: that is the role we fill. For Danfoss-branded EvoFlat and Termix units, see our Danfoss HIU page.
How an SAV HIU Works
A heat network serves many flats from one plant room. The heat interface unit in your cupboard is the link between that network and your home, and it means the flat needs no boiler of its own.
- STEP 1
The plant room heats water
A plant room, often in the basement, heats the heat network water and pumps it round the building to the HIU in every flat.
- STEP 2
Pressure and flow held steady
SAV says a FlatStation has to control pressure, flow rate, heat transfer and temperature. Differential pressure and flow control valves do that job.
- STEP 3
Plate heat exchanger
The HIU does not make heat; it passes it on. A plate heat exchanger moves heat from the network water to the flat's hot water and heating.
- STEP 4
Thermostats call for heat
The wall thermostat switches on the pump inside the HIU, and thermostatic radiator valves set the temperature room by room.
- STEP 5
Cooled water goes back
The cooled network water returns to the plant room to be heated again. It runs in a closed loop and is used again and again.
Because the network water runs in a closed loop, most faults in the flat sit in one of three places: the HIU itself, the radiator valves, or the pressure of the flat's heating circuit.
Know your unit
Which SAV HIU Do You Have?
SAV groups its FlatStations into series by what they do. The series is on the unit's label and in the building's O&M file.
1 Series
Hot water only, such as the Novi.
3 Series
Heating only, through an indirect heating circuit.
5 Series
Instant hot water with direct heating.
7 Series
Instant hot water with indirect heating.
4 Series
Cooling interface units for flats with cooling.
Retrofit units
Bespoke replacement HIUs made to fit existing pipework.
Same unit, two names
SAV's O&M manuals are titled with both the FlatStation and the Danfoss Termix name, so your paperwork may use either.
- 7 Series DS (IV)
- Termix VVX-IV
- 5 Series DS (IV)
- Termix VMTD-IV
- 3 Series DS (IV)
- Termix VX-IV
- 1 Series DS (FI)
- Termix Novi

Common SAV HIU Problems and What Causes Them
The heating faults below come from the residents' guide SAV links from its support page, which also warns residents not to change any settings on the pump. For hot water faults, SAV says to go straight to your maintenance provider.
One radiator stays cold
SAV's resident guide names a stuck spindle on the thermostatic radiator valve. It can often be freed by hand once the head is off.
No heat into a radiator at all
The small opening in a radiator valve can be blocked by debris from the radiators. Flushing the valve briefly at its fully open setting can clear it.
Air in the radiators
Air pockets form when the heating has been off. Bleeding the radiators lets the water flow again, then the pressure must be checked.
Heating pressure below 1 bar
The gauge on the front of the HIU should read between 1 and 2 bar, around 1.5. Below 1, the heating needs refilling and re-pressurising by an engineer.
Pump stuck after the summer
If the pump has been off all summer, scale can make it stick. SAV's guide suggests running the heating for 15 minutes now and then, and calling for help if the pump will not start.
No hot water or slow hot water
SAV sends hot water problems straight to your maintenance provider. We check the strainers where fitted, the plate heat exchanger and the control valves.

Cold patches on underfloor heating rather than radiators? The fault may be at the manifold: see underfloor heating repair. If several flats lose heat at once, the cause is usually the plant room or the network, not the HIUs: call our 24/7 emergency line and see heat network maintenance.
What we do
SAV HIU Services
SAV's advanced engineer training covers HIU installation, commissioning, expansion vessel setting and fault finding. That is the work we carry out on FlatStations, from one flat to a whole block.

SAV HIU service
Plate heat exchanger and strainers checked and cleaned where fitted, valves and pump tested, expansion vessel and pressure set, temperatures recorded, report with photos.
HIU servicingSAV HIU repair
No hot water, cold radiators, lost pressure, noise and leaks, traced to the part and repaired. We always aim to fix it on the first visit.
Descaling and heat exchangers
Scaled plate heat exchangers cleaned or replaced so hot water comes back up to temperature.
Controls, pumps and valves
Differential pressure and flow control valves, thermostatic valves, actuators, pumps and room thermostats checked and exchanged.
HIU installation and replacement
New and replacement heat interface units installed, commissioned and handed over with readings, where a unit is beyond economic repair.
Whole-block programmes
Every FlatStation in a block on one programme, with access arranged, a report per flat and a block summary.
Block contractsSep to Feb
when SAV says waits for its engineers get longer
How Often Should an SAV HIU Be Serviced?
SAV's own pages do not set a fixed service interval for FlatStations, but they do warn that lead times for engineers can be longer between September and February. In London blocks we recommend an annual service, booked in spring or summer so the unit is ready before the heating season and you are not in the winter queue. Over the summer, SAV's residents' guide suggests running the heating for 15 minutes from time to time so the pump does not stick, and we record the unit's model and serial details on every report.
Read more: how often should an HIU be serviced?
24/7 HIU Call-Out for No Heating or No Hot Water
Our emergency line is answered day and night, weekends included, including through the busy winter months. In London we aim to attend the same day. We always aim to fix the fault on the first visit; if a part has to be ordered, the flat is made safe and you get a fixed price first.
How an SAV HIU Job Works
- 1
Free site visit
We look at the HIU, the pressure gauge, the riser and the controls. Free in London; in the Home Counties, free for larger jobs, otherwise we quote the visit first.
- 2
Report with photos
Which FlatStation series you have, what is working, what is worn and what needs doing, sent by email.
- 3
Clear price
A fixed price for the repair or service before any work, priced per unit for blocks.
- 4
Planned visits
Annual servicing on an agreed schedule, booked outside the winter rush where we can.
A photographed PDF report after every SAV HIU service
No handwritten job sheets and no chasing. Our engineers complete each job electronically on site in Maintivo, our job management system, so the report is built as the work happens: photos, readings, work done and recommendations.
You receive it as a digital PDF by email the same day, with certificates attached where they apply, ready to forward to a landlord, a freeholder, the directors or an insurer.
- Before and after photosEvery unit and fault photographed on site
- Readings and checksTemperatures, pressures and test results recorded
- Work done and next stepsWhat was fixed, what needs quoting, when we return
- Sent the same dayDigital PDF report by email, ready to forward
Example layout. Completed on site in Maintivo.
Qualifications Behind the Work
SAV asks its Advanced Service Engineers to show their SAV card when they visit, so residents can check who is at the door.
What customers say on Google
“I've had the pleasure of working with Petru and his team on a number of maintenance jobs, and they've always been fantastic. They're professional, reliable, and complete every job to a really high standard. Petru is incredibly knowledgeable and it's clear he takes pride in his work.”
Deborah L.
Google review
“Excellent service. Price assessment: reasonable price.”
Attila B.
Google review
“The team is knowledgeable, efficient, and attentive to detail. A great choice for anyone looking for reliable maintenance services. Highly recommended!”
Ben
Google review
Book a Free SAV HIU Site Visit
In London an engineer comes to see your SAV HIU for free; in the Home Counties it is free for larger jobs, and for smaller ones we quote the visit first. You get a report with photos and a fixed price before any work.


